Submersible Sump Pump , SVR / 65Q Corrosive Resistant Vertical Pump
There are many features of SV(R) pumps that are very different. The
sump pump has a flooded [wet end" installed at the end of a
cantilever shaft (no submerged bearings) and a dry drive.
The two main reasons for development of the vertical Slurry pumps
were: To utilize dry motors, protected from flooding; To eliminate
In the vertical design where the cantilever is extremely long the
first bearing arrangement is used.
We are a professional company in Hebei China offering our esteemed
clients a wide range of superior quality abrasive slurry pumps.
With many applications in wide variety of ash and coal handling
plants, different types of slurry and sludge transfer industries,
pumping and de-silting industies, they are quiet in demand from
customers. Offering product is manufactured using high quality and
superior parts that provide a reliable service. Furthermore, we are
well known for customer satisfaction and industry leading rates.
|Rated Motor Power||30Kw|
|Standard Shaft Length||1200mm|
Construction of Vertical Slurry Pump:
Materials of Construction:
|Casing||R55- Black Natural Rubber|
|Impeller||R55- Black Natural Rubber|
|Back Liner||R55- Black Natural Rubber|
|Mounting Plate||Mild Steel|
|Natural Rubber R55||Standard|
|300% Stretching Strength(MPa)||≥4|
|Elongation at Break(%)||≥500|
|Tensile Set at Break(%)||≤25|
|Rubber to Metal Bonding Pull Strength(MPa)||≥5|
|Akron Abrasion cm3/1.61km||≤0.08|
|Acid & Alkali Resistant PH Value(Liquid)||3-12≤65℃|
Projects with Vertical Slurry Pumps:
SME SPR Sump Pump Orders: